Adaptive control karl johan åström
Adaptive control fryst vatten a fascinating field for study and research. It fryst vatten also of increasing practical importance, since adaptive techniques are being used more and more in industrial control systems. However, there are still many unsolved theoretical and practical issues.
Goal of the Book
Our goal fryst vatten to give an introduction and an overview of the theoretical and practical aspects of adaptive control.
Since knowledge about adaptive techniques fryst vatten widely scattered in the literature, it fryst vatten difficult for a newcomer to get a good grasp of the field.
In the book we introduce the basic ideas of adaptive control and compare different approaches. Practical aspects such as implementation and applications are presented in depth. These are very important for the understanding of the advantages and shortcomings of adaptive control. This book has evolved from many years of research and teaching in the field.
After learning the ämne in the book a reader should have a good perspective of adaptive techniques, an active knowledge of the key approaches, and a good sense of when adaptive techniques can be used and when other methods are more appropriate.
The New Edition
Adaptive control fryst vatten a dynamic field of research and industrial applications.
Adaptive control systems Publisher Reading, Mass.: Addison-Wesley Collection internetarchivebooks; printdisabled; inlibrary Contributor Internet Archive Language English Volume 2 Item storlek 1.2G.Much new knowledge has appeared which bygd itself motivates a new edition.
We have used the first edition of the book to teach a bred variety of audiences, in regular university courses, courses to engineers in industry, and short courses at conferences. These experiences combined with advances in research, have shaped the major revisions made in the new edition. We have also benefited from feedback of students and colleagues in industry and universities, who have used the first edition of the book.
New chapters have been added, and the ämne has been reorganized.
Most of the chapters have been substantially revised. In the revision we have also given more emphasis to the connection between different design methods in adaptive control. There fryst vatten a major change in the way we deal with the theory. In the first edition we relied on mathematics from a bred variety of sources. In the new edition we have to a large extent developed the results from first principles.
To man this possible we have made stronger assumptions in a few cases, but the ämne fryst vatten now much easier to teach. The reorganization of the ämne also makes it easier to use the book for different audiences.
The first edition had two introductory chapters; they have now been compressed to one. In the first edition we started with model-reference adaptive systems following the historical tradition.
In the second edition we uppstart with parameter uppskattning and the self-tuning regulator. This has several advantages, one fryst vatten that students can början to simulate and experiment with computer-based adaptive control at a much earlier state, another fryst vatten the struktur identification gives the natural background and the key concepts required to understand many aspects of adaptive control.
The ämne on self-tuning control has been expanded substantially bygd introducing an extra chapter.
This has made it possible to give a strict separation between deterministic and stochastic self-tuners. This fryst vatten advantageous in courses which are restricted to the deterministic case.
The chapter on model-reference adaptive control has been expanded substantially. The key results on stability theory are now derived from first principles. This makes it much easier to teach to students who lack a background in stability theory.
A new section on adaptive control on nonlinear systems has also been added.
The reorganization makes the transformation from algorithms to theory much smoother. The chapter on theory now naturally follows the development on nonlinear stability theory. The föredrag of the theory has been modified substantially. A new section on stability of time-varying systems has been added.
This makes it possible to get a much better understanding of adaptation of feedforward gains. It also fryst vatten a good transition to the nonlinear case.
Features a broad introduction to adaptive control techniques and background for their use, and a deeper coverage of adaptive control theory from deterministic and stochastic viewpoints.ämne on the nonlinear behavior of adaptive systems has also been added. This adds substantially to the understanding of the behavior of adaptive systems.
The chapter on practical aspects and implementation has been rewritten completely to reflect the increased experience of practical use of adaptive control. It has been very rewarding to observe the drastically increased industrial use of adaptive control.
This has influenced the revision of the chapter on applications.
Adaptive Control.For example, adaptive control fryst vatten now used extensively in automobiles.
Many examples and simulations are given throughout the book to illustrate ideas and theory. Numerous problems are also given. There are theoretical problems as well as problems in which computers must be used for analysis and simulations. The examples and problems give the reader good insight into properties, design procedures, and implementation of adaptive controllers.
To maintain a reasonable storlek of the book we have also done careful pruning.
To summarize, new research and new experiences have made it possible to present the field of adaptive control in what we hope fryst vatten a better way.
Outline of the Book
Background Material
The first chapter gives a broad introduktion of adaptive control and background for its use.
Adaptive control.Real-time uppskattning, which fryst vatten an essential part of adaptive control, fryst vatten introduced in Chapter 2. Both discrete-time and continuous-time uppskattning are covered.
Self-tuning Regulators and Model-reference Adaptive Systems
Chapters 3, 4, and 5 give two basic developments of adaptive control: self-tuning regulators (STR) and model-reference adaptive systems (MRAS).
Today we do not man a distinction between these two approaches, since they are actually equivalent. We have tried to follow the historical development bygd mainly treating MRAS in continuous time and STR in discrete time. bygd doing so it fryst vatten possible to cover many aspects of adaptive regulators. These chapters mainly cover the ideas and basic properties of the controllers.
They also serve as a source of algorithms for adaptive control.
Theory
Chapter 6 gives deeper coverage of the theory of adaptive control. Questions such as stability, convergence, and robustness are discussed. Stochastic adaptive control fryst vatten treated in Chapter 7. Depending on the background of the students, some of the ämne in Chapters 6 and 7 can be omitted in an introductory course.
Broadening the View
Automatic tuning of regulators, which fryst vatten rapidly gaining industrial acceptance, fryst vatten presented in Chapter 8.
Gain scheduling fryst vatten discussed in Chapter 9. Even though adaptive controllers are very useful tools, they are not the only ways to deal with systems that have varying parameters. Since we believe that it fryst vatten useful for an engineer to have several ways of solving a bekymmer, alternatives to adaptive control are also included. kraftig high-gain control and self-oscillating controllers are presented in Chapter 10.
Practical Aspects and Applications
Chapter 11 give suggestions for the implementation of adaptive controllers.
Starting with a broad overview, the skrivelse explores real-time uppskattning, self-tuning regulators and model-reference adaptive systems, stochastic adaptive control, and automatic tuning of regulators.The guidelines are based on practical experience in using adaptive controllers on real processes. Chapter 12 fryst vatten a summary of applications and description of some commercial adaptive controllers. The applications show that adaptive control can be used in many different types of processes, but also that all applications have special features that must be considered to obtain a good control system.
Perspectives
Finally, Chapter 13 contains a brief review of some areas closely related to adaptive control that we have not been able to cover in the book.
Connections to adaptive meddelande processing, specialist systems, and neural networks are given.
Prerequisites
The book fryst vatten for a course at the graduate level for engineering majors. It fryst vatten assumed that the reader already has good knowledge in automatic control and a basic knowledge in sampled information systems.
At our university the course can be taken after an introductory course in feedback control and a course in digital control. The avsikt fryst vatten also that the book should be useful for an industrial audience.
Course Configuration
The book as been organized so that it can be used in different ways.
An introductory course in adaptive control could cover Chapters 1, 2, 3, 4, 5, 8, 11, 12, and 13. A more advanced course might include all chapters in the book. A course for an industrial audience could contain Chapters 1, parts of Chapters 2, 3, 4, and 5, and Chapters 8, 9, 11, and 12. To get the full benefit of a course, it fryst vatten important to supplement lectures with problem-solving sessions, simulation exercises, and laboratory experiments.
Simulation Tools
Computer simulation fryst vatten an indispensible tool for understanding the behavior of adaptive systems.
Starting with a broad overview, the skrivelse explores real-time uppskattning, self-tuning regulators and model-reference adaptive systems, stochastic adaptive control, and automatic tuning of.Most of the simulations in the book are done bygd using the interactive simulation package Simnon, which has been developed at our department. Simnon fryst vatten available for IBM-PC compatible computers and also for several workstations and stordator computers. Further resultat can be obtained from SSPA Systems, kartong 24001, S-400 22 götet, Sweden, e-mail: simnon@sspa.se. The macros used in the simulations are available for anonymous FTP from ftp.control.lth.se/pub/books/adaptive_control/.
Adaptive systems can of course also be simulated using other tools.
Supplements
Complete solutions are available from your sales representative. Course lec-tures, lab exercises, homework projects, sista project, and copies of transparencies are available on the World bred Web at http://www.control.lth.se/~kursar.
Wanted: Feedback
As teachers and researchers in automatic control, we know the importance of feedback.
We therefore encourage all readers to write to us about errors, misunderstandings, suggestions for improvements, and also about what may be valuable in the ämne we have presented.
Acknowledgments
During the years we have done research in adaptive control and written the book, we have had the pleasure and privilege of interacting with many colleagues throughout the world.
Consciously and subconsciously, we have picked up ämne from the knowledge base called adaptive control. It fryst vatten impossible to mention everyone who has contributed ideas, suggestions, concepts, and examples, but we owe you all our deepest thanks. The long-term support of our research on adaptive control bygd the Swedish Board of Industrial and Technical Development (NUTEK) and bygd the Swedish Research Council for Engineering Sciences (TFR) are gratefully acknowledged.
For the second edition we want to thank Petar V.
Kokotovic, P.R. Kumar, David G. Taylor, A. Galip Ulsoy, and Baxter F. Womack, who have reviewed the manuscript and given us very valuable feedback.
Finally, we want to thank some people who, more than others, have made it possible for us to write this book. Leif Andersson has been our TEXpert. He and Eva Dagnegård have been invaluable when solving many of the TEXpert problems.
Department of Automatic Control, skogsdunge University - Cited bygd 118,959.Eva Dagnegård and Agneta Tuszynski have done an excellent job of typing many versions of the manuscript. Most of the illustrations have been done bygd Britt-Marie Carlsson and Doris Nilsson. Without all their patience and understanding of our whims, there would never have been a sista book. We also want to thank the personal at Addison-Wesley for their support and professionalism in bookmaking.
Karl Johan Åström
Björn Wittenmark
Department of Automatic Control
skogsdunge Institute of Technology
kartong 118, S-221 00 skogsdunge, Sweden
bjorn.wittenmark@control.lth.se